No busy-tone for VoIP

Unanswered Question
Mar 12th, 2009
User Badges:

Hi all,


This is my setup:


PBX_A--E1R2--Cisco GW--WAN--Cisco GW--E1R2--PBX_B


PBX_A made a call to PBX_B, if the extension is engaged, no busy/engage tone is heard on PBX_A.


I have the following 2 commands for both Cisco GW:

voice call convert-discpi-to-prog

voice rtp send-recv


Kindly advice what might be the possible solutions.


Thanks and best regards.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion