cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1638
Views
0
Helpful
5
Replies

ASA 5510 L2L Dynamic IP and ASDM

Json12345
Level 1
Level 1

Hello.

I'm looking for a ASDM guide to implement L2L tunnel between a ASA 5510 with static ip and a device with a dynamic ip. I relly suck when it comes to CLI so I would like some help setting this up via ASDM. I've got it working once but that was a long time ago so i don't remember the way of doing this. I think it all went bad when I added a Remote Access VPN for a client.

5 Replies 5

andrew.prince
Level 10
Level 10

Json12345
Level 1
Level 1

Follow up.

I'm getting theese errors:

Group = DefaultRAGroup, IP = x.x.x.x, Removing peer from peer table failed, no match!

That is because you have not configured a dynamic CRYPTO group for remote VPNs - check your config.

HTH>

Json12345
Level 1
Level 1

yes, it was the Linksys router with the dynamic ip that only could authanticate with ip and not name.

It's working now with a different router.

np - glad to help.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: