All our cisco network devices send their logs to our Ciscoworks server. We are having some issues with calls on one of our gateways and I have turned on some debugging and I want the debugs to be sent to the Ciscoworks server.
Our VG is configured as follows:
logging buffered 64000
logging trap debugging
logging facility syslog
logging source-interface GigabitEthernet0/0
The w.x.y.z is the ip address of our Ciscowork server. When I changed the logging trap informational to logging trap debugging it still just logs informational logs as I did a wr mem on the router and the ony this it logs to the ciscoworks server is MULLCC_VG w.x.y.z Mar 11 2009 09:47:23 SYS 5 CONFIG_I Configured from console by vty0 (w.x.y.z)
What can I do to ge the debugging logs to be sent to the ciscoworks server.
The debug that I have enabled are:
1) Debug voip ccapi inout.
2) Debug isdn q931