cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
330
Views
0
Helpful
1
Replies

MGCP Registration issue..unable to configure isdn bind-l3 ccm-manaer

Ayodeji Okanlawon
VIP Alumni
VIP Alumni

Guys,

I am having an issue with mgcp registration.

On the serial port..I am unable to configure the isdn bind-l3 ccm-manager command. The iso version is

c3845-spservicesk9-mz.124-15.T5.bin.

All that is available is isdn bind-l3 q931/q921.

When I issue a sh ccm-manager, the gateway shows evrything as registered.

The output of sh ccm-manager is below

OCVG01#sh ccm-manager

MGCP Domain Name: OCVG01.test.production.uk

Priority Status Host

============================================================

Primary Registered 10.128.250.128

First Backup Backup Ready 10.34.161.161

Second Backup None

Current active Call Manager: 10.128.250.128

Backhaul/Redundant link port: 2428

Failover Interval: 30 seconds

Keepalive Interval: 15 seconds

Last keepalive sent: 11:06:41 gmt Mar 12 2009 (elapsed time: 00:00:05)

Last MGCP traffic time: 11:06:41 gmt Mar 12 2009 (elapsed time: 00:00:05)

Last failover time: 10:56:14 gmt Mar 12 2009 from (10.128.250.128)

Last switchback time: 10:56:29 gmt Mar 12 2009 from (10.34.161.161)

Switchback mode: Graceful

MGCP Fallback mode: Not Selected

Last MGCP Fallback start time: None

Last MGCP Fallback end time: None

MGCP Download Tones: Disabled

TFTP retry count to shut Ports: 2

FAX mode: cisco

Configuration Error History:

OCVG01#

Mar 12 11:06:56.133: MGCP Packet sent to 10.128.250.128:2427--->

NTFY 767469129 *@OCVG01.test.production.uk MGCP 0.1

X: 0

O:

<---

Mar 12 11:06:56.133: MGCP Packet received from 10.128.250.128:2427--->

200 767469129

<---

Also a debug mgcp packet gives me a response code of 200..which shows evrything is fine...

However On callmanager the status shows as unregistered.

The setup is as follows

CCM--3845VG--qsig--PBX.

When I used h.323 on the gateway evrything works.

Here is a the mgcp config

ccm-manager redundant-host 10.34.161.161

ccm-manager mgcp

ccm-manager music-on-hold

ccm-manager config server 10.34.161.161

!

mgcp

mgcp call-agent 10.128.250.128 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp bind control source-interface Loopback0

mgcp bind media source-interface Loopback0

!

mgcp profile default

interface Serial0/0/0:15

no ip address

encapsulation hdlc

isdn switch-type primary-qsig

isdn overlap-receiving

isdn incoming-voice voice

isdn contiguous-bchan

no cdp enable

Please rate all useful posts
1 Reply 1

Ayodeji Okanlawon
VIP Alumni
VIP Alumni

Never Mind, I didnt have the service mgcp on pri-group timeslots command

Please rate all useful posts