ASA 5510

Unanswered Question

Hello all. I am totally stuck and need some help. I have an ASA 5510 and i had a static inside,outside statment that i needed to change. Actually had to change the ip address of the inside box. I have made the change and know I or the vendor can access the box. I can ping it from the firewall and all access rules are the change except for the change of the ip address. If I look at the xlate it is all pointed in the write direction. Could someone help?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Thu, 03/12/2009 - 12:23
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Jeffrey


Could you post the running config of the ASA together with the IP address of the box on the inside.


Jon

robertson.michael Fri, 03/13/2009 - 12:26
User Badges:
  • Silver, 250 points or more

In addition to the information requested by Jon, the output of 'show xlate debug' will also help us troubleshoot this issue.


-Mike

Actions

This Discussion