03-12-2009 09:58 AM - edited 03-11-2019 08:03 AM
Hello all. I am totally stuck and need some help. I have an ASA 5510 and i had a static inside,outside statment that i needed to change. Actually had to change the ip address of the inside box. I have made the change and know I or the vendor can access the box. I can ping it from the firewall and all access rules are the change except for the change of the ip address. If I look at the xlate it is all pointed in the write direction. Could someone help?
03-12-2009 12:23 PM
Jeffrey
Could you post the running config of the ASA together with the IP address of the box on the inside.
Jon
03-13-2009 12:26 PM
In addition to the information requested by Jon, the output of 'show xlate debug' will also help us troubleshoot this issue.
-Mike
03-13-2009 12:52 PM
Hello everyone we just got it fixed today. Issue was with wrong gateway on the device.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: