03-12-2009 02:25 PM - edited 03-13-2019 06:09 PM
Hello all,
I gonna replace DVD-ROM on UCM5.X server.
Is any "show" "list" etc command that could be run to verify if replacment DVD-ROM is working not?
Or do you have other way to check ?
Thanks,
Ethan
03-13-2009 12:40 AM
try show tech system
or try to burn a firmware upgrade use os and select local dvd as source instead of ftp/sftp that may be the best way to test it.
03-13-2009 07:50 AM
thanks for your reply,GONZALO.
From" show tech system", I could see information below regarding DVDROM.
(I haven't replace the DVDROM yet)
-----------------------------------------
cdrom 32896 0 [ide-cd]
......
class: CDROM
bus: IDE
detached: 0
device: hda
driver: ignore
desc: "HL-DT-STDVD-ROM GDR-D10N"
------------------------------------------
My question is:
1. Do you see anything suspected? Is this DVD really defective?
2. If I will test it with " firmware upgrade use os" DVD, do you mean that I need to click " upgrade ..." through UCM admin webpage? any detailed steps?
Thanks again,
Ethan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide