Backup CUCM

Unanswered Question
Mar 12th, 2009
User Badges:

I have formed a SFTP server to backup the configurations of the Cisco Call Manager Version 6, and have formed a name of user and password for the Call manager. In the Call manager I have formed the following thing:


Disaster Recovery System / Backup / Backup Device / Add New

I select: Network Directory

Server name: IP Address New SFTP Server

Path name: /

Username: the username configured in the SFTP Server

Password : the password configured in the SFTP Server


With this information this messages is showed:

Update failed : Unable to access SFTP server. Please make sure the login credentials and path are correct.


I have tried from a SFTP Client PC to verify the credentials and the computer connects without problems.


The SFTP server is configured with the port number 22.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
George Thomas Thu, 03/12/2009 - 15:44
User Badges:
  • Blue, 1500 points or more

Please check if the SFTP service is started.

ricardorojas123 Fri, 03/13/2009 - 12:50
User Badges:

Yes, the SFTP is started, I connect a SFTP Client to the SFTP Server, and this Client is connect sucessfull.

Chris Deren Sun, 03/15/2009 - 07:08
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

what is the sftp application you are using? Make sure the username and password you are specifying on DRS matches the sftp application user you created on that application.


HTH,


Chris

ricardorojas123 Tue, 03/17/2009 - 08:54
User Badges:

The application is Core FTP mini-sftp server, and the same username and password configured in the Cisco Call manager was tested from a sftp client.

Actions

This Discussion