03-12-2009 09:04 PM - edited 03-15-2019 04:50 PM
I need to append 9 for all incoming number, when i use below rule:
rule 1 /\(^(.*\)/ /9\1/
Result is no 9 append for incoming number.
Is there any wrong for this translation rule.
Please help.
Solved! Go to Solution.
03-12-2009 10:58 PM
hi sir
rule 1 /\(^(.*\)/ /9\1/
this rule i find it incorrect there is one missing parenthesis, ) try
/^\(.*\)/ /9\1/
make surethe voice translation profile is correctly applied into dial-peers.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml#simple
03-12-2009 10:58 PM
hi sir
rule 1 /\(^(.*\)/ /9\1/
this rule i find it incorrect there is one missing parenthesis, ) try
/^\(.*\)/ /9\1/
make surethe voice translation profile is correctly applied into dial-peers.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml#simple
03-12-2009 11:29 PM
Hi Gogasca,
After change to your pattern when i test the voice translation pattern is correct.
when i test incoming call to ip phone it still hsow original number no 9 apppend show on my phone.
I attach the configuration kindly take a look.
03-12-2009 11:59 PM
Hi Gogasca,
I solved the prolem aleady. After apply the translation pattern into my E1 dialpeer.
Thank you so much.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide