03-13-2009 04:28 AM - edited 03-06-2019 04:34 AM
Good afternoon, gents!
I am configuring snmp on my 3750 switches. When i apply access list with my snmp host ip address, this host can not reach the switch. If i remove access list or allow any host to connect (permit any) it works fine.
I even tried to delete all access list and snmp configuration and reconfigure it again - nothing changed. Tried to change access list number - same problem.
There are no hits in the access list also.
access-list 90 permit 192.168.1.27
snmp-server community <snmpcommstring> RO 90
snmp-server host 192.168.1.27 <snmpcommstring>
Thank you in advance!
03-13-2009 04:37 AM
This my be a really stupid question, but the device you are coming from is sourcing it's SNMP requests from that IP isn't it?
Add a log entry to the permit any and see what IP gets a hit.
03-13-2009 04:45 AM
That was not "a really stupid question", my friend ))))) As it turned out, there were 2 ethernet interfaces on my snmp server ))))) The guy who was in charge of merging them into etherchannel forgot about it!
Thank you very much!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide