cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
400
Views
0
Helpful
2
Replies

Passthrough Public IPs / NAT Exempt

mloraditch
Level 7
Level 7

Here is my scenario. I have a /26 from my provider. I have a server that I want behind the firewall but must have a public IP on it and can't be nat'd. I have carved a /30 out of my /26 and have nat exempted it inbound from the outside and outbound from the inside. I have set up routing on the inside and can ping the server on it's public ip from the firewall but can not get out to the internet. Is what I want do even possible? In the past I have done similar but had the provider give me another public block to route through the firewall and that works great. I fear that may be the solution here.

Thanks in advance!

1 Accepted Solution

Accepted Solutions

Collin Clark
VIP Alumni
VIP Alumni

Sorry I don't have an ASA to test with, but can't you static it?

static (inside,outside) 75.50.95.73 75.50.95.73 netmask 255.255.255.255

View solution in original post

2 Replies 2

Collin Clark
VIP Alumni
VIP Alumni

Sorry I don't have an ASA to test with, but can't you static it?

static (inside,outside) 75.50.95.73 75.50.95.73 netmask 255.255.255.255

Awesome that worked. Never even crossed my mind.

Thanks!!!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: