cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
814
Views
5
Helpful
5
Replies

How to configure Slave Sup720 ?

sivaprakasam81
Level 1
Level 1

Hi All,

How to configure Stanby supervisor engine. I need to change the boot image string.

1118th307-6513-01#show diagnostic sanity

Pinging default gateway 192.168.30.1

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 192.168.30.1, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms

Invalid boot image "sup-bootflash:s72033-ipservicesk9-mz.122-18.SXF11.bin" specified in the boot string on the slave.

Please check your boot string on the slave.

None of the images specified in the boot string on the slave are valid.

Please specify at least one valid image in the slave boot string to ensure the

slave is in a bootable state.

Thank you!

1 Accepted Solution

Accepted Solutions

Hello Sivaprakasam,

yes it is fine.

Hope to help

Giuseppe

View solution in original post

5 Replies 5

drolemc
Level 6
Level 6

You are hitting bug CSCsc98471.

Show diagnostic sanity fails to check software modularity boot string

This is a cosmetic issue with the "show diagnostic sanity" command.

You should manually verify the bootstring if using modular IOS

Hi,

How can i manually verify the boot string. This is my boot string vlaues.,

1118th307-6513-01#show run | inc boot

boot system flash sup-bootflash:s72033-ipservicesk9-mz.122-18.SXF11.bin

boot system flash slavesup-bootflash:s72033-ipservicesk9-mz.122-18.SXF11.bin

boot system flash slavebootflash:s72033-ipservicesk9-mz.122-18.SXF11.bin

Hello Sivaprakasam,

verify that the files at the different locations exist

do:

dir slavesup-bootflash:s72033-ipservicesk9-mz.122-18.SXF11.bin

dir slavebootflash:s72033-ipservicesk9-mz.122-18.SXF11.bin

if you get positive information the boot string is correct

Hope to help

Giuseppe

Hi,

I hope the reply is very positive,

6513-01#dir slavesup-bootflash:s72033-ipservicesk9-mz.122-18.SXF11.bin

Directory of slavesup-bootflash:/s72033-ipservicesk9-mz.122-18.SXF11.bin

1 -rwx 42827268 Sep 16 2008 14:18:56 -04:00 s72033-ipservicesk9-mz.122-18.SXF11.bin

65536000 bytes total (22470184 bytes free)

Thank you,

Hello Sivaprakasam,

yes it is fine.

Hope to help

Giuseppe

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card