Linksys SPA phone auto-configure commands

Unanswered Question
Mar 13th, 2009
User Badges:

Our company is using a homegrown Asterisk VoIP server solution. We use DHCP and TFTP to auto-configure Linksys SPA phones. When we

change the configuration, we would like the phones to reload the config

files. Maybe we could use multicast to force the phones to restart

and/or reload the configuration since we know that Linksys phones

respond to some multicast commands. Where can we get the list of those

multicast commands, possibly with details (packet formats, command codes)?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
paolo bevilacqua Fri, 03/13/2009 - 19:10
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi, if this information is not in the document called "remote provisioning guide", I don't think you can find it anywher else.

paolo bevilacqua Mon, 03/16/2009 - 20:31
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You are welcome. Please remember to rate useful posts with the scrollbox below.

gudelijam Tue, 03/17/2009 - 08:57
User Badges:

For the record, the doc I found is entitled spa_provisioning_guide.pdf

Actions

This Discussion