Linksys SPA phone auto-configure commands

gudelijam · ‎03-13-2009

Our company is using a homegrown Asterisk VoIP server solution. We use DHCP and TFTP to auto-configure Linksys SPA phones. When we

change the configuration, we would like the phones to reload the config

files. Maybe we could use multicast to force the phones to restart

and/or reload the configuration since we know that Linksys phones

respond to some multicast commands. Where can we get the list of those

multicast commands, possibly with details (packet formats, command codes)?

paolo bevilacqua · ‎03-13-2009

Hi, if this information is not in the document called "remote provisioning guide", I don't think you can find it anywher else.

gudelijam · ‎03-16-2009

Hi,

Thanks. I will look for it.

paolo bevilacqua · ‎03-16-2009

You are welcome. Please remember to rate useful posts with the scrollbox below.

gudelijam · ‎03-17-2009

For the record, the doc I found is entitled spa_provisioning_guide.pdf