03-16-2009 01:56 AM - edited 03-15-2019 04:52 PM
Hello
I am having cisco 2811 router with NM HDA module ,with VWIC2-4FXO,VIC-4FXS/DID. and cisco Call Manager 5.1 . now i want to integrate both system for router voice call to PSTN network to IP network visa-versa.Please help me out to configure and resolve the issue
Thanks In advance
Regards
Subhasis
03-16-2009 08:09 AM
Hi friend, initial steps:
CCM
1. Configure your gateway (h323 or mgcp)
2. Configure your route-patterns
3. Assign the partition, CSS, MRGL, Region, Location to your gateway.
GATEWAY
1. Initially, for making calls to the PSTN numbers, create a dial-peer pots with a destinatton pattern .T, the port should be your FXO port
dial-peer voice 100 pots
destination-patterns .T
port 1/0 (FXO port)
2. To receive calls from the PSTN to your IPT network, configure a connection plar pointing to an internal ip phone in your FXO voice port.
voice-port 1/0 (FXO port)
connection plar 1212 (DN IP Phone).
We can help you if you post your gateway configuration.
Hope this help
David
03-16-2009 08:13 AM
This is a good guide for this configuration.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_1_3/ccmcfg/b06gtway.html
Best regards
David
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide