Qos

Unanswered Question
Mar 16th, 2009
User Badges:

Is it possible to give a VLAN an LLQ queue. We have some SAN traffic which is switched across a VLAN and we would like to move this traffic from a dedicated link to a shared link.


Thanks

Darren

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Mon, 03/16/2009 - 08:48
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Darren


Yes it's possible as long as you can identify the traffic you want to prioritize. But it does depend on the hardware in use. For example the 6500 switch uses many different modules and some of them do not support a priority queue as such.


What hardware are you using ?


Jon

darrenriley5 Mon, 03/16/2009 - 09:29
User Badges:

We are using ws-3750G-24TS to terminate 4x LES100 links and to connect to the EMC kit. I have no experience in the SAN but all I know is the srdf/s traffic runs across a non-routed vlan. I would imagine I would need to classify this traffic using the vlan then create an LLQ queue if this traffic were to be moved on to a shared link?


Thanks

Jon Marshall Mon, 03/16/2009 - 10:04
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Darren


Attached is a link to the config guide for 3750 with an example of using the expedite queue on a 3750. Have a read and see how much sense it makes and feel free to come back with further queries -


http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_46_se/configuration/guide/swqos.html#wp1395244


Jon

Actions

This Discussion