Jaime Valencia Mon, 03/16/2009 - 10:48
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

call blocking based on ANI can only be done using H323


you need to provide more info


HTH


java


if this helps, please rate

terryskelton Mon, 03/16/2009 - 11:56
User Badges:

It is H323, we are receiving calls from 8776421263 that we want to block. The call sare coming into a DID for a user that wanrts this blocked, what to do ???

CHRIS CHARLEBOIS Mon, 03/16/2009 - 12:29
User Badges:
  • Silver, 250 points or more

First, create a translation rule that will identify the incoming call:


voice translation-rule 1

rule 1 reject /8776421263/



Then associate it with a translation profile:


voice translation profile call_block_profile

translate calling 1


Then place that translation profile into your inbound dial-peer. It you don't have one defined, create one using the incoming called-number dial-peer command, as so:


dial-peer voice 111 pots

incoming called-number .

call-block translation-profile incoming call_block_profile

call-block disconnect-cause incoming invalid_number


The call-block command allows the gateway to give a disconnect message rather than just a fast busy.


terryskelton Mon, 03/16/2009 - 13:09
User Badges:

Sweet I was stuck at the voice trans profile...Thanks, I'll give her a try.

Actions

This Discussion