03-16-2009 11:44 AM
Hi,
We enabled a static default route with tracking option that checks a tcp
port 80 service on the Internet using IP SLA. If we enable SNMP traps for IP SLA, what type of SNMP-trap message should we expect whenever the IP SLA changes state?
03-16-2009 11:52 AM
You will see traps from the CISCO-RTTMON-MIB. Depending on the type of failure and IOS version, you may see rttMonNotification, rttMonTimeoutNotification, etc.
03-16-2009 12:43 PM
Thanks jclarke,
Do you have the specific SNMP-trap message that will be coming from CISCO-RTTMON-M? IE what our HP OpenView server will see coming from the routers.
03-16-2009 12:46 PM
I don't have examples, but the traps are all listed in the CISCO-RTTMON-MIB. I've already listed two trap names that can be sent to HPOV. If you have the CISCO-RTTMON-MIB loaded in OV, you should see the trap varbinds decoded properly.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide