03-16-2009 12:25 PM
Howdy. I'm trying to connect users at a remote site to a main site using PPTP. The main site is setup and clients can connect from outside the building. Users at the remote site cannot connect to the main. The remote site has a ASA 5505 and I've enabled gre/pptp (see attachment) The IP address of the main site is 66.228.224.10. The ASA shown in the attachment is on the remote site. The error message I get is that gre/pptp is not enabled. I'm obviously doing something wrong, but I don't know what. This is my first try at setting up a VPN and would appreciate your help.
03-20-2009 02:03 PM
You can only have one PPTP/L2TP connection through the PIX Security Appliance when you use PAT. This is because the necessary GRE connection is established over port 0 and the PIX Security Appliance only maps port 0 to one host.
03-23-2009 11:38 PM
Do you have "inspect pptp" in your configuration?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide