03-16-2009 03:01 PM - edited 03-15-2019 04:53 PM
I am trying to connect Cisco 2821 voice gateway to Harries PBX via E1 PRI
PBX team told me they configured it with ETSI configuration
What ISDN switch type should I configure in my 2821 gateway to communicate with the PBX ?
Regards
Mohamed
03-16-2009 08:01 PM
primary-net5
likely, layer3-protocol network and internal clock.
03-17-2009 02:58 AM
I would check primary-QSIG, as it is a PABX
03-17-2009 01:48 PM
PBX does not necessarily imply QSIG.
For example, if the PBX interface is set to be connected to the PSTN, it will be strictly Q.931 only.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide