03-16-2009 09:05 PM - edited 03-04-2019 03:57 AM
Dear All Expert,
Right now, i had problem with telnet from outside to inside,but i can telnet from inside to router.i don't know what is issue. Please see in the attach file.
Solved! Go to Solution.
03-17-2009 08:57 PM
Configure:
no access-list 1
access-list 1 permit 192.168.1.1 0.0.0.31
And will be working fine. Remember: never use "any" for NAT ACL.
03-16-2009 09:29 PM
hi, I am not finding any configuration problem. Do one thing, enable debug ip packet on outside interface and see the telnet traffic.
03-16-2009 09:42 PM
Dear Rupesh,
Thanks you for your help ...
Could you let me know the command enable debug to see telnet .....?
best Regards,
03-16-2009 09:49 PM
1. debug ip packet
You can do one think.
Line vty 0 4
access-class 2 in
access-list 2 permit tcp any any eq 23 log
03-17-2009 08:39 PM
Dear Rupesh,
thanks for your help!!!
this command i tried to used but it still cannot telnet from outside. Oh!! how can we know ISP block ? last time i asked ISP guy and they said no block any thing.... and they don't have firewall ... so how can we make sure our router is ok and ISP has problem.......
Could you advice me how can i do and solve this issue.?
Best Regard
03-17-2009 08:57 PM
Configure:
no access-list 1
access-list 1 permit 192.168.1.1 0.0.0.31
And will be working fine. Remember: never use "any" for NAT ACL.
03-17-2009 10:44 PM
At first, You have to check, Telnet traffic is reaching to ur Outside interface or not, if initiated from Outside world. Do Debug is the best command to check the Telnet packet. If traffic is not received, then check with ur ISP.
1. Debug ip packet
2. Debug ip packet Detail
3. Debug ip packet interface 2 ( if ACL 2 is applied)
03-17-2009 10:49 PM
Hi ,
Please remove the âip nat outside â from WAN interface and then try to telnet from outside.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide