SRST

Unanswered Question
Mar 17th, 2009

I have SRST router , i need once incoming calls reach to FXO ports , ring group of extension at same time , it is like hunt group in call manager but i need the steps in SRST router configuration

thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bigcappa1 Tue, 03/17/2009 - 01:57

This is one way I have done it but there are others. On the users phone I configured a second line (5555). When SRST had kicked in a call coming into a specific number was sent to the number 5555 and all users with that number on there phone heard the ringing.

Basically each line was a call queue for IPCC Express, but if the Callmanager failed you would lose IPCC as well so this was the option that suited the customer best

SRST config

call-manager-fallback

max-conferences 8 gain -6

ip source-address 10.X.X.X port 2000

max-ephones 42

max-dn 144 dual-line

keepalive 10

no huntstop

alias 1 5920 to 5555 huntstop

alias 2 5921 to 5555 huntstop

alias 3 5922 to 5555 huntstop

time-format 24

date-format dd-mm-yy

Obviously your dial peers will decide how the call is routed to the FXO port

Hope this helps

Paul

Actions

This Discussion