adamclarkuk_2 Tue, 03/17/2009 - 04:00

Hi

You will need to create (add) the vlans before assigning ports to them (although it will take your config).

Depending on ios/model of switch, there are 2 ways to do this.

From global configuration mode :-

switch(config)#vlan 500

switch(config-vlan)#name

switch(config-vlan)#exit

OR

switch#vlan database

switch(vlan)#vlan 500 name

switch(vlan)#apply

switch(vlan)#exit

Once you have created the vlans, you will be able to assign them to interfaces.

glen.grant Tue, 03/17/2009 - 04:22

If you do a "show vlan " command and they show in the display as active then they are already in the database , other create them as the previous poster indicated.

Actions

This Discussion