Joseph W. Doherty Tue, 03/17/2009 - 05:32
User Badges:
  • Super Bronze, 10000 points or more

Perhaps because "service timestamps" or "service timestamps uptime" is defaulted or configured.


Try "service timestamps datetime".

adamclarkuk_2 Tue, 03/17/2009 - 06:23
User Badges:
  • Silver, 250 points or more

Hi Joseph


You missed the log option off that command ;-)


service timestamps log localtime show-timezone

John Blakley Tue, 03/17/2009 - 07:06
User Badges:
  • Purple, 4500 points or more

In addition to what Adam said, I also do debugs the same way:


service timestamps debug datetime localtime

service timestamps log datetime localtime


HTH,


John

Giuseppe Larosa Tue, 03/17/2009 - 09:20
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello John,

I like more time resolution so I use


service timestamps debug datetime localtime msec


service timestamps log datetime localtime msec


Hope to help

Giuseppe



Richardsma Tue, 03/17/2009 - 09:30
User Badges:

In addition and without wanting to state the obvious, make sure the clock is set, ideally to a time source.

Actions

This Discussion