assign a private line to n IP phone

Answered Question
Mar 17th, 2009
User Badges:

Dears, is there anyway that i can use on callManager 4.3 to assign a private line to a specific extension so that extension only can dial outside numbers through this line?


There is any similar way to configure it on cme by associating a directory number with a foreign exchange office (FXO) port. Is there any similar way to configure it on callmanager 4.3?

Correct Answer by Jaime Valencia about 8 years 1 month ago

no, you can create a route pattern and bind it to the FXO. but there is no real equivalent of 1 button - 1 fxo


on FXO config attendant DN to that line


HTH


java


if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jaime Valencia Tue, 03/17/2009 - 08:21
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

very simple, use a CSS that only reaches route patterns to PSTN


if you don't want anyone calling the line create a special partition and do not add it to any CSS


HTH


java


if this helps, please rate

Mustafa Al Housami Tue, 03/17/2009 - 08:44
User Badges:

there is no config similar to the trunk that is configured on cme that associates the dn with the fxo port?

Correct Answer
Jaime Valencia Tue, 03/17/2009 - 08:49
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

no, you can create a route pattern and bind it to the FXO. but there is no real equivalent of 1 button - 1 fxo


on FXO config attendant DN to that line


HTH


java


if this helps, please rate

Actions

This Discussion