Solved: assign a private line to n IP phone

Mustafa Al Housami · ‎03-17-2009

Dears, is there anyway that i can use on callManager 4.3 to assign a private line to a specific extension so that extension only can dial outside numbers through this line?

There is any similar way to configure it on cme by associating a directory number with a foreign exchange office (FXO) port. Is there any similar way to configure it on callmanager 4.3?

Jaime Valencia · ‎03-17-2009

no, you can create a route pattern and bind it to the FXO. but there is no real equivalent of 1 button - 1 fxo

on FXO config attendant DN to that line

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

View solution in original post

Jaime Valencia · ‎03-17-2009

very simple, use a CSS that only reaches route patterns to PSTN

if you don't want anyone calling the line create a special partition and do not add it to any CSS

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

Mustafa Al Housami · ‎03-17-2009

there is no config similar to the trunk that is configured on cme that associates the dn with the fxo port?

Jaime Valencia · ‎03-17-2009

no, you can create a route pattern and bind it to the FXO. but there is no real equivalent of 1 button - 1 fxo

on FXO config attendant DN to that line

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate