MLPPP configuration

Unanswered Question
Mar 17th, 2009
User Badges:
  • Purple, 4500 points or more

All,


I have an existing mlppp configuration, and we're installing another vwic2 into the router. I don't believe this is going to be in issue, but I wanted to verify my config:


The existing config (chopped down)


int multi1

ip address x.x.x.x x.x.x.x

ppp multilink

ppp multilink group 1


int s0/0

no ip address

ppp multilink

ppp multilink group 1


int s0/1

no ip addr

ppp multilink

ppp multilink group 1


This is the existing from memory. The question is, is the following the correct way to add another link? I need it to be separate from my existing one:


int multi2

ip address x.x.x.x x.x.x.x

ppp multilink

ppp multilink group 2


int s1/0

no ip

ppp multilink

ppp multilink group 2


int s1/1

no ip

ppp multilink

ppp multilink group 2



This is the first time I'm setting this type of configuration up, but I figure that I'm just assigning my serial interfaces to a named group under the multilink interface.


Thanks,

John

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Richard Burts Tue, 03/17/2009 - 09:29
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

John


This looks right to me.


HTH


Rick

John Blakley Tue, 03/17/2009 - 09:30
User Badges:
  • Purple, 4500 points or more

Thanks Rick. It wasn't a trick question, I just wanted to verify my thoughts (and what I had already told someone else). :-)


John

Actions

This Discussion