directory number

Unanswered Question
Mar 18th, 2009
User Badges:

does it matter to follow number pattern in creating directory number for a specific partition? can i use two(2) the same dn for the same partition? what is the rule in creating directory number? thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
testeven Thu, 03/26/2009 - 09:09
User Badges:
  • Cisco Employee,

Hi,


You can have shared lines, these lines always have identical DNs. Please refer to this link for DN configuration:


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b03dn.html


However there are some guidelines you need to follow when configuring a dial plan. A telephony system must be configured so that any extension can be reached in an unambiguous manner. On the CUCM SRND there's a chapter dedicated to dial plan configuration and explains some requirements and best practices. Please refer to:


https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/dialplan.html


HTH, if it does please rate.


Regards,


Teresa.

Actions

This Discussion