cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
330
Views
0
Helpful
1
Replies

CRS 4.0.(5)SR2 supports IP communicator ?

azeemo157
Level 1
Level 1

hi i have a confusion does CRS 4.0.(5)SR2 supports IP communicator ? I cant understand what has been written in the following document http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf . At Client the Cisco CAD is now using IP communicator but the quality of Voice is not good even though QOS policies etc has already been applied

1 Reply 1

Aaron Harrison
VIP Alumni
VIP Alumni

Hi

UCCX will have NO impact on your voice quality. I'm sure you'll find that if you make a normal non-IPCC call you still have poor voice quality.

Normally it's due to badly configured switch ports (assuming that your hardware phones are OK).

You need to be trusting DSCP, not CoS (often the case if you've incorrectly configured AutoQoS).

Post your LAN switch configs for a start.

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: