IPSec on 2811

Answered Question
Mar 18th, 2009
User Badges:

I have looked through the NetPro forums for a couple of days now and have not found my answer.


My question is, how do I setup an IOS based IPSec VPN tunnel using a 2811 with IOS os SP Services 12.4(13)?


Let me know if you need any more information.


Thank you,

Richard

Correct Answer by Mark Yeates about 8 years 2 months ago

Richard,

I was just looking at the feature navigator and it appears that the SP services IOS does not support Easy VPN. I would recommend using one of these feature sets:


Advanced Security

Advanced IP Services

Advanced Enterprise Services


You can order this feature set upgrade through your Cisco partner.


HTH,

Mark




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Mark Yeates Wed, 03/18/2009 - 11:16
User Badges:
  • Gold, 750 points or more

Richard,


Are you planning to connect two of these routers for your VPN tunnel? Attached is a template I created a while back and may be useful for you. Also you can use the SDM GUI to create the tunnels. If you don't have the SDM files they can be downloaded here.


http://www.cisco.com/cgi-bin/tablebuild.pl/sdm


HTH,

Mark





rsvensson Wed, 03/18/2009 - 12:28
User Badges:

Mark,


I am unable to input the command crypto isakmp...the only options under crypto are:


ca

engine

key

pki

provisioning

wui


What do I need to have in order to use VPN on this device?


I have attached a show version incase it may help.


Thanks,

Richard



Attachment: 
Correct Answer
Mark Yeates Wed, 03/18/2009 - 12:55
User Badges:
  • Gold, 750 points or more

Richard,

I was just looking at the feature navigator and it appears that the SP services IOS does not support Easy VPN. I would recommend using one of these feature sets:


Advanced Security

Advanced IP Services

Advanced Enterprise Services


You can order this feature set upgrade through your Cisco partner.


HTH,

Mark




Mark Yeates Thu, 03/19/2009 - 11:18
User Badges:
  • Gold, 750 points or more

You are most welcome! Glad I was able to help, and hope that template will be of use for you when you get the correct IOS loaded.


Best of luck!

Mark

Actions

This Discussion