03-18-2009 08:00 AM - edited 02-21-2020 03:21 AM
I have looked through the NetPro forums for a couple of days now and have not found my answer.
My question is, how do I setup an IOS based IPSec VPN tunnel using a 2811 with IOS os SP Services 12.4(13)?
Let me know if you need any more information.
Thank you,
Richard
Solved! Go to Solution.
03-18-2009 12:55 PM
Richard,
I was just looking at the feature navigator and it appears that the SP services IOS does not support Easy VPN. I would recommend using one of these feature sets:
Advanced Security
Advanced IP Services
Advanced Enterprise Services
You can order this feature set upgrade through your Cisco partner.
HTH,
Mark
03-18-2009 11:16 AM
Richard,
Are you planning to connect two of these routers for your VPN tunnel? Attached is a template I created a while back and may be useful for you. Also you can use the SDM GUI to create the tunnels. If you don't have the SDM files they can be downloaded here.
http://www.cisco.com/cgi-bin/tablebuild.pl/sdm
HTH,
Mark
03-18-2009 12:28 PM
03-18-2009 12:55 PM
Richard,
I was just looking at the feature navigator and it appears that the SP services IOS does not support Easy VPN. I would recommend using one of these feature sets:
Advanced Security
Advanced IP Services
Advanced Enterprise Services
You can order this feature set upgrade through your Cisco partner.
HTH,
Mark
03-19-2009 05:55 AM
thank you for your assistance.
03-19-2009 11:18 AM
You are most welcome! Glad I was able to help, and hope that template will be of use for you when you get the correct IOS loaded.
Best of luck!
Mark
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide