QOS(Priority command)on WS-X6408A-GBIC in outbound direction

Unanswered Question
Mar 18th, 2009
User Badges:

Hi All,


We are trying to figure out prioritizing voice traffic to around 20 percent of the link bandwidth in the outbound direction on WS-X6408A-GBIC by the below command


policy-map <name>

class <name>

priority percent 20

!

class-map match-any <name>

match access-group <name>

!

ip access-list extended <name>


.When applying the service policy on outbound direction,it gives an error message saying priority command is not supported on outbound direction on this interface.


Is there a way were we could prioritize without using the priority command or I am missing something .


Any help is really appreciated.


Thanks


Regards

Anantha Subramanian Natarajan


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
Jon Marshall Wed, 03/18/2009 - 13:30
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Anantha


Please don't cross post as it just creates confusion. I have posted an answer in Lan Switching & Routing.


Could we stick to that thread.


Jon

anasubra_2 Wed, 03/18/2009 - 14:44
User Badges:

Hi John,


Sure and will do the same.


Thanks


Regards

Anantha Subramanian Natarajan

Actions

This Discussion