03-18-2009 01:16 PM - edited 03-04-2019 03:59 AM
Hi All,
We are trying to figure out prioritizing voice traffic to around 20 percent of the link bandwidth in the outbound direction on WS-X6408A-GBIC by the below command
policy-map <name>
class <name>
priority percent 20
!
class-map match-any <name>
match access-group <name>
!
ip access-list extended <name>
.When applying the service policy on outbound direction,it gives an error message saying priority command is not supported on outbound direction on this interface.
Is there a way were we could prioritize without using the priority command or I am missing something .
Any help is really appreciated.
Thanks
Regards
Anantha Subramanian Natarajan
03-18-2009 01:30 PM
Anantha
Please don't cross post as it just creates confusion. I have posted an answer in Lan Switching & Routing.
Could we stick to that thread.
Jon
03-18-2009 02:44 PM
Hi John,
Sure and will do the same.
Thanks
Regards
Anantha Subramanian Natarajan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide