ddns not updating Cisco C827 w/ 12.4.23

Unanswered Question
Mar 19th, 2009
User Badges:

The only error shown in the debug is "DATA START 404" see below.

Everything else is working as desired, all my internet traffic is passing thru this router now.

But, I see when I check my services at dyndns.org that the ip has not been updated.


Someone must have gotten this feature working, Any suggestions?

I have also attached my config (with a passwords and usernames changed:)


Kevin


ADSL#

*Mar 12 06:45:51.178: DYNDNSUPD: Adding DNS mapping for mydomain.homeip.net <=> 64.229.179.83 server 63.208.196.95

*Mar 12 06:45:51.178: HTTPDNS: Update add called for mydomain.homeip.net <=> 64.229.179.83

*Mar 12 06:45:51.182: HTTPDNSUPD: Session ID = 0xC

*Mar 12 06:45:51.182: HTTPDNSUPD: URL = '<A HREF="javascript:newWin('http://myname:pas...@members.dyndns.org/nic/update&hostname')">http://myname:pas...@members.dyndns.org/nic/update&hostname</A>= mydomain.homeip.net&myip=64.229.179.83'

*Mar 12 06:45:51.186: HTTPDNSUPD: Sending request

*Mar 12 06:45:51.354: HTTPDNSUPD: Response for update mydomain.homeip.net <=> 64.229.179.83


*Mar 12 06:45:51.358: HTTPDNSUPD: DATA START 404 <----- HERE is the problem,,,,,

*Mar 12 06:45:51.358: HTTPDNSUPD: DATA END, Status is Response data recieved, successfully

*Mar 12 06:45:51.358: HTTPDNSUPD: Call returned SUCCESS, update of mydomain.homeip.net <=> 64.229.179.83 succeeded

*Mar 12 06:45:51.362: DYNDNSUPD: Another update completed (outstanding=0, total=0)

*Mar 12 06:45:51.366: HTTPDNSUPD: Clearing all session 12 info

ADSL#




Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Richardsma Thu, 03/19/2009 - 08:22
User Badges:

Don't know if this is the cause but in your config you have the following..


ip ddns update method DynDNS

HTTP

add pas...@members.dyndns.org/nic/update%3Fsystem')">http://mylogon:pas...@members.dyndns.org/nic/update%3Fsystem=



Between "update" and "system" you have "%3F" where you should have a "?"


To add a ? to a config you need to do CTRL + V first.


As I said, I'm not sure if this is the cause of your issue but worth a try.

kvieyra12 Thu, 03/19/2009 - 14:14
User Badges:

Yes, I have since changed that. I was hoping someone would recognize that 404 error. I did see a suggestion that it was too long a password being sent to dyndns.org. But, I have also shortened mine to 5 characters.

Actions

This Discussion