Changing IP for eth0 in PIX 515

ece344609_2 · ‎03-19-2009

Hi all,

We moved our firewall recently from one subnet to another so I need to change the external IP for eth0 via the console. Can anyone either show me the commands or be kind enough to point to the documentation?

Thanks a bunch.

andrew.prince · ‎03-19-2009

Config:-

interface e0

ip address x.x.x.x y.y.y.y

end

wr mem

HTH>

ece344609_2 · ‎03-19-2009

Thanks a bunch, that's exactly what I was looking for.

Jesse Wiener · ‎03-19-2009

It depends on the version you are running.

6.x and older.

http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/bafwcfg.html#wp1112226

7.x and newer

http://www.cisco.com/en/US/docs/security/asa/asa70/configuration/guide/intparam.html#wp1051819

Hope that helps

-Jesse