NAT issue

Unanswered Question
Mar 19th, 2009
User Badges:

Hi all,

I have an 5540 ASA

I would like to NAT the packtes this way:


ORIGINAL PACKET

source: 192.168.0.10

destination: 10.10.10.50


TRANSLATED PACKET

source: 172.16.0.10

destination: 20.20.20.50


Is this possible?


I always NAT the packet modifying only the source of translated packet...and now I`d like modifying the source and the destination of the translated packet.


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jon Marshall Thu, 03/19/2009 - 13:29
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Assuming the traffic flow is from inside to outside ie. source 192.168.0.10 is on inside and destination 10.10.10.50 is on outside


(if it's not you can just adjust)


static (inside,outside) 172.16.0.10 192.168.0.10 netmask 255.255.255.255


static (outside,inside) 10.10.10.50 20.20.20.50 netmask 255.255.255.255


Jon

Tauer Drumond Thu, 03/19/2009 - 13:39
User Badges:

Hi Jon,

thanks for your help.

This was exactly what I wanted.


Regards

Actions

This Discussion