03-19-2009 01:17 PM - edited 03-06-2019 04:42 AM
I am upgrading the current Cisco 3550 to Cisco 3560. Is WS-G5484 (GBIC)compatible with GLX-SX-MM (SFP).
Solved! Go to Solution.
03-19-2009 01:30 PM
There will not be any issues, since the wavelength match up. Just make sure you are using MM fiber end to end, and same fiber core size (micron).
HTH,
jerry
03-19-2009 01:21 PM
Hi,
Do you mean interconnecting them?
WS-G5484 is 850nm and GLX-SX-MM is 850nm, they will work when you interconnect them.
Please check out the following link:
HTH,
jerry
03-19-2009 01:26 PM
yes, GBIC on 6513 and SFP on the 3560 switch. The cisco 3560 is directly connected to the 6513. And also, are there any longterm issues with this setup?
03-19-2009 01:30 PM
There will not be any issues, since the wavelength match up. Just make sure you are using MM fiber end to end, and same fiber core size (micron).
HTH,
jerry
03-19-2009 02:58 PM
If you are connecting them directly, make sure that your fiber optic cable is SC-LC (Duplex).
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: