03-20-2009 08:51 AM - edited 07-03-2021 05:20 PM
I need to convert a trust certificate (.crt) to .pem file to be recognized in a WLC...
anybody can help me ?
Solved! Go to Solution.
03-20-2009 09:25 AM
Here's a good guide how to do it.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml
I already did it this way along with a Microsoft Cert Auth. So it should work fine. Hope that helps!
03-20-2009 09:25 AM
Here's a good guide how to do it.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml
I already did it this way along with a Microsoft Cert Auth. So it should work fine. Hope that helps!
03-20-2009 01:43 PM
This was very helpful, thank you !
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: