Not sure if anyone out there has a C-Class HP Blade server enclosure with a 10Gig HP BL-C Switch connected to a core 6500 using 802.1q trunk and EtherChannel:
Anyway, having issue with conenctivity:
I set up the dot1q trunks and added members on the BL-C, andl am unable to get the servers to talk thru the switches and the Cisco core (setup to allow default-all vlans)
Here is the scenario
- Servers are VM ESX 3.5. VMware is tagging using VST- where the V-switch is tagging, like in the document:
http://www.vmware.com/pdf/esx3_vlan_wp.pdf
- Here is the BL-C config (truncated)
/c/port 1
tag ena
/c/port 2
tag ena
/c/port 3
tag ena
/c/port 18
tag ena
/c/port 19
tag ena
/c/l2/vlan 2
ena
name "network"
def 1 2 3 18 19
/c/l2/vlan 3
ena
name "infrastructure"
def 1 2 3 18 19
/c/l2/vlan 4
ena
name "devtest"
def 1 2 3 18 19
/c/l2/vlan 5
ena
name "vpn"
def 1 2 3
/c/l2/vlan 6
ena
name "stage"
def 1 2 3 18 19
/c/l2/vlan 8
ena
name "iscsi"
def 1 2 3 18 19
/c/l2/vlan 10
ena
name "corecard"
def 1 2 3 18 19
/c/l2/vlan 20
ena
name "ecommerce"
def 1 2 3 18 19
/c/l2/vlan 30
ena
name "sql"
def 1 2 3 18 19
/c/l2/vlan 40
ena
name "blades1"
def 1 2 3 18 19
/c/l2/vlan 41
ena
name "vmbuild"
def 1 2 3 18 19
/c/l2/vlan 50
ena
name "blades2"
def 1 2 3 18 19
/c/l2/vlan 60
ena
name "blades3"
def 1 2 3 18 19
/c/l2/vlan 70
ena
name "blades4"
def 1 2 3 18 19
/c/l2/vlan 80
ena
name "AspectUIP"
def 1 2 3 18 19
/c/l2/vlan 192
ena
name "management"
def 1 2 3 18 19
/c/l2/stp 1/off
/c/l2/stp 1/clear
/c/l2/stp 1/add 1 2 3 4 5 6 8 10 20 30 40 41
/c/l2/stp 1/add 50 60 70 80 192
/c/l2/stp 1/port 1/on /fastfwd enabled
/c/l2/stp 1/port 2/on /fastfwd enabled
/c/l2/stp 1/port 3/on /fastfwd enabled
/c/l2/stp 1/port 18/off
/c/l2/stp 1/port 19/off
/c/l2/trunk 2
ena
add 18
add 19
/c/sys/syslog
host 10.20.3.24 -mgt
host2 10.20.2.30 -data
facil2 5
/c/ufd/on
/* /c/l3/if 250
* addr
* ena
/* /c/l3/gw 254
* ena
* addr
- Here is the Cisco Core switch config (truncated):
interface Port-channel100
description 20 Gbps trunk to Core2 t1/1 t1/9
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast disable
interface TenGigabitEthernet1/1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast disable
spanning-tree link-type point-to-point
channel-group 100 mode on
interface TenGigabitEthernet1/9
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast disable
spanning-tree link-type point-to-point
channel-group 100 mode on
I verified the Etherchannel is up
No traffic seems to pass (dhcp requests, pings to static IP, etc)
Any ideas on what is wrong?
