Calls to CUE - Sample Interval Mismatch

Unanswered Question
Mar 20th, 2009
User Badges:

I am having an issue with when calling in on an h323 connection to a CME CUE. There is a tx/rx sample interval mismatch.


CV_2811#show sccp connections details


bridge-info(bid, cid) - Normal bridge information(Bridge id, Calleg id)

mmbridge-info(bid, cid) - Mixed mode bridge information(Bridge id, Calleg id)


sess_id conn_id call-id codec pkt-period type bridge-info(bid, cid) mmbridge-info(bid, cid)


7 - 472 N/A N/A transmsp All RTPSPI Callegs N/A


7 7 473 g729 0 rtpspi (217,472) N/A


7 - 472 N/A N/A transmsp All RTPSPI Callegs N/A


7 8 471 g711u 20 rtpspi (216,472) N/A


On the IP phone I call in on from the h323 side the Rx is 10 ms while the Tx is 20 ms.


Any ideas?


voice-card 0

dspfarm

dsp services dspfarm

!

!

voice call send-alert

voice rtp send-recv

!

voice service voip

allow-connections h323 to sip


sccp local Vlan6

sccp ccm x.x.x.x identifier 1

sccp


dial-peer voice 40161 voip

description CUE Voicemail

destination-pattern 40...

session protocol sipv2

session target ipv4:x.x.x.x

dtmf-relay sip-notify

codec g711ulaw

no vad

!

sccp ccm group 1

associate ccm 1 priority 1

associate profile 1 register mtp0018b9bff1a8

!

dspfarm profile 1 transcode

codec g711ulaw

codec g711alaw

codec g729r8

codec gsmfr

codec g729abr8

codec g729ar8

codec g729br8

maximum sessions 4

associate application SCCP


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion