I have 2 FWSM module in each chassis.
How can I configure
1)Intra-chassis failover and parallely Inter-Chassis failover
means
CHASSI A 1)FWSM1
2)FWSM2
CHASSI B 1)FWSM1
2)FWSM2
If CHASSIS A FWSM1 down,CHASSI A FWSM2 active.
and if CHASSI A FWSM2 down,CHASSI B FWSM1(active)and CHASSI B FWSM2 standy
Please suggest ...