cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6299
Views
0
Helpful
8
Replies

BGP in IPBase?

John Blakley
VIP Alumni
VIP Alumni

All,

I looked in the feature navigator, and if I'm reading this right, it looks like BGP is in the 12.4(24) version of IP-Base. Is this true? I've already loaded it on a router, and I've got the router scheduled to reboot later tonight, but I wanted to see if I was reading the feature navigator right.

Thanks,

John

HTH, John *** Please rate all useful posts ***
1 Accepted Solution

Accepted Solutions

John

If you mean 12.4(24)T then yes it would appear from Feature Navigator that it does support BGP ie. you are reading it right.

Jon

View solution in original post

8 Replies 8

Jon Marshall
Hall of Fame
Hall of Fame

John

Which device are you loading it on ?

Jon

It's a 2821

HTH, John *** Please rate all useful posts ***

John

If you mean 12.4(24)T then yes it would appear from Feature Navigator that it does support BGP ie. you are reading it right.

Jon

Perfect! I'll know more tonight. I changed my boot string, and I've got it scheduled to reload way after hours.

Thanks Jon

John

HTH, John *** Please rate all useful posts ***

Edison Ortiz
Hall of Fame
Hall of Fame

it looks like BGP is in the 12.4(24)

Are you sure about the release number?

__

Edison.

No...of course not =)

It's 12.4(24)T. That's a definite.

c2800nm-ipbasek9-mz.124-24.T.bin

HTH, John *** Please rate all useful posts ***

I don't even see 12.2(24) is IOS selector.

Strange!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: