03-23-2009 02:55 PM - edited 03-06-2019 04:46 AM
for 4503-E series and 4506-E series
I want to prepare the configuration offline.
When I tftp the configuration to nvram:
No SSH keys generated
VTP mode and domain not configured
While it gives no error at startup?
Is this not possible?
03-23-2009 03:39 PM
Try this ...
1. Copy the configuration from the TFTP to your flash (copy tftp: flash:).
2. Once the copy has been successful, copy the configuration from the flash: to the running-config (copy flash: run).
03-23-2009 11:56 PM
I'll try it today.
Problem is that the blades are not in there. So it will give errors on the interface configuration.
Possibly when I'll do a write I'll loose these configuration. That's the reason for the copy tftp
It's as preparation for a migration where the chassis and sup will be upgraded while the existing blades will be kept.
03-25-2009 01:28 PM
the vtp information is not there because it is not stored in config.text, but rather vlan.dat.
04-23-2009 12:03 AM
yes correct. you may want to copy vlan.dat before you remove/delete it
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: