6500 SUP 720 bootvar

Unanswered Question
Mar 24th, 2009

Hello, I have a sup-720 on a 6509 where:

#show bootvar

BOOT variable = sup-bootflash:s72033-psv-mz.122-17d.SXB.bin,1

CONFIG_FILE variable =

BOOTLDR variable =

Configuration register is 0x2102

Standby is not present.

What ,1 does mean on "BOOT variable =" ?

I would like to set to boot from the first image on the sup-bootflash: memory is enought to do "(config)#no boot system" ?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
helenio Tue, 03/24/2009 - 02:42

thank's but the post was done to avoid to set the variable and be able to boot from the first IOS avaiable on sup-bootflash

..

What ,1 does mean on "BOOT variable =" ?

I would like to set to boot from the first image on the sup-bootflash: memory is enought to do "(config)#no boot system" ?

glen.grant Tue, 03/24/2009 - 04:47

If you have more than one boot variable it chose the first one in the configuration and if for some reason it is missing or unbootable it will move to the 2nd boot variable. Just put them in the order you want them to boot.

Actions

This Discussion