PIX IPSEC Help needed

rsjavahar · ‎03-24-2009

can i give a static gate way to Ipsec/l2tp adopter, we deployed the tunnel its working fine , but one specific application required Gateway ip address should be the standard , we are working on XP

PPP adapter jj:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface

Physical Address. : 00-53-45-00-00-00

Dhcp Enabled. . . . . . . . . . . : No

IP Address. .. . : 10.133.3.202

Subnet Mask . . : 255.255.255.255

Default Gateway .: 10.133.3.202

DNS Servers . . : 10.133.3.3

Primary WINS Server . : 10.133.3.3

i want change the default Gate insted of 10.133.3.202 / 10.133.3.145

plz help me how to do it ?

andrew.prince · ‎03-24-2009

You cannot change the default gateway IP address, as the traffic needs to enter the virtual adapter to be encrypted and sent over the IPSEC/L2TP.

rsjavahar · ‎03-25-2009

Hi

Is there any other option like routing or ACL or some thing to make 10.133.3.146 to act as a gate way for the vpn clients

andrew.prince · ‎03-25-2009

No - the gateway on the client MUST be the virtual adapter that the traffic is encrypted thru on the local machine, that is the only way it works.