cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
308
Views
0
Helpful
3
Replies

PIX IPSEC Help needed

rsjavahar
Level 1
Level 1

can i give a static gate way to Ipsec/l2tp adopter, we deployed the tunnel its working fine , but one specific application required Gateway ip address should be the standard , we are working on XP

PPP adapter jj:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface

Physical Address. : 00-53-45-00-00-00

Dhcp Enabled. . . . . . . . . . . : No

IP Address. .. . : 10.133.3.202

Subnet Mask . . : 255.255.255.255

Default Gateway .: 10.133.3.202

DNS Servers . . : 10.133.3.3

Primary WINS Server . : 10.133.3.3

i want change the default Gate insted of 10.133.3.202 / 10.133.3.145

plz help me how to do it ?

3 Replies 3

andrew.prince
Level 10
Level 10

You cannot change the default gateway IP address, as the traffic needs to enter the virtual adapter to be encrypted and sent over the IPSEC/L2TP.

Hi

Is there any other option like routing or ACL or some thing to make 10.133.3.146 to act as a gate way for the vpn clients

No - the gateway on the client MUST be the virtual adapter that the traffic is encrypted thru on the local machine, that is the only way it works.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: