03-24-2009 04:18 AM - last edited on 03-25-2019 06:58 PM by ciscomoderator
I've configured the UC520 and it works like a charm standalone. But now I wan't to deploy it into our network where a windows 2003 server acts dhcp. I've read countless of forum threads on this but I'm not certain how to disable the dhcp in the UC and use the server 2003 as dhcp.
I want the the data (vlan 1) to be assigned IP from the windows dhcp (192.168.100.1XX) and the phone (vlan 100) to be assigned by the UC.
To spice up the problem, I also wan't the IP Communicator to work on users computers.
Thanks!
Solved! Go to Solution.
03-24-2009 12:22 PM
03-24-2009 04:29 AM
There are DHCP pools, you would need to disable those.
"no ip dhcp pool phones" etc.
If the DHCP server isn't in the same subnet as the devices it is servicing, you would need the ip helper-address on the layer 3 interface for each VLAN.
hth,
nick
03-24-2009 04:55 AM
Thanks!
Since I'm fairly new to this I'd appriciate if you could write down the cli commands I need to do this?
Thanks!
03-24-2009 12:22 PM
no ip dhcp pool
interface
ip helper-address
04-02-2009 02:41 AM
Thank you very much! It worked out nicely!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide