Syslogs using Ciscoworks.

Unanswered Question
Mar 24th, 2009
User Badges:

Hi,


I am trying to get Ciscowork to receive debugging syslogs from out voice gateway in our Call Centre.


The ciscoworks versions are:

CiscoWorks Common Services 3.1.1

Campus Manager 5.0.2

Cisco View 6.1.7

Device Fault Manager 3.0.4

Internetwork Performance Monitor 4.0.1

Integration Utility 1.7.1

RME 4.1.1


If I made an ammendment to the VG, syslogs on Ciscoworks will receive the syslog messages. When I enable debugging on the VG, Ciscoworks doesn't receive the debugging messages.


The config on the voice gateway is:

logging buffered 64000

logging trap debugging

logging facility syslog

logging source-interface GigabitEthernet0/0

logging w.x.y.z


The device I am try to get debug from are Cisco IOS Software, 5400 Software (C5400-IS-M), Version 12.4(15)T7


The debugs on the voice gateway are:

1) Debug voip ccapi inout.

2) Debug isdn q931


Thanks for your help

Anthony.





  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion