03-24-2009 06:03 AM
Hi
we are getting same error after upgarding MDF 1.13 and Cat4000IOS.RME40.v3-0.readme.Zip.device package for RME.but still the same error
10.112.200.3 PRIMARY RUNNING Feb 26 2009 20:29:31 CM0056 Config fetch failed for 10.112.200.3 Cause: CM0204 Could not create DeviceContext for 837 Cause: CM0206 Could not get the config transport implementation for 10.112.200.3 Cause: UNKNOWN Action: Check if required device packages are available in RME. Action: Check if protocol is supported by device and required device package is installed.
RME version 4.0.5
Running IOS on both the switchws is cat4500-ipbasek9-mz.122-40.SG.bin
also both these devices showing in RME>DEVICE>SELECTOR LIST> ? SIGN.
Plse help me out this is on another server.
03-24-2009 06:09 AM
03-24-2009 11:49 AM
Hi Clark
plse help me out!!!
Regrads
Vaibhav
03-24-2009 01:36 PM
You do not have a package to support this switch. If this is a 4507R-E switch, then you need to upgrade to RME 4.0.6 before you can install the Cat4000IOS package which adds support for this switch. If this is a 4507-R (without the -E) it is supported in RME 4.0.5, but you need to upgrade your Cat4000IOS.zip package. The latest RME 4.0.5 Cat4000IOS package is 3.0.
As I have said to you before, it looks like your RME package repository is damaged. In order to fix this so you can install new packages, you need to open a TAC service request.
Once your package issues are sorted out, you will be able to properly manage this switch in RME.
03-25-2009 10:29 AM
Hi Clark
thanks a lot it is 4507R-E so we need to upgarde 4.0.6 than we will update CAT4000IOS...once we will done the same let you know the resull
Regards
Vaibhav
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: