Router 7613 boot problem

Unanswered Question
Mar 24th, 2009
User Badges:
  • Community Spotlight Award,

    Spanish Member's Choice: May 2016

Hi guys, I have a router 7613 with a supervisor 720. each time I reboot it I have the follow:

***

*** --- SHUTDOWN NOW ---

***


Mar 24 09:55:16: %SYS-SP-5-RELOAD: Reload requested

Mar 24 09:55:16: %OIR-SP-6-CONSOLE: Changing console ownership to switch process

or




Mar 24 09:55:16: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ens

ure console debugging output.


System Bootstrap, Version 8.4(2) Release

Copyright (c) 1994-2005 by cisco Systems, Inc.

Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory


rommon 1 >




I am using only one supervisor the standby blade is not inserted.



the onfiguration register is 0x2102


What the problem could will be?


Thanks!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
a.alekseev Tue, 03/24/2009 - 09:04
User Badges:
  • Gold, 750 points or more

in rommon set correct BOOT variable

after that enter command "sync"

It should fix your problem.

Leonardo A Pena... Tue, 03/24/2009 - 12:24
User Badges:
  • Community Spotlight Award,

    Spanish Member's Choice: May 2016

Hi this is what I have:


router#show bootvar

BOOT variable = ,1;sup-bootdisk:s72033-advipservicesk9_wan-mz.122-18.SXF15a.bin,

1;

CONFIG_FILE variable =

BOOTLDR variable =

Configuration register is 0x2102


Standby is not present.


rommon 1 > set

PS1=rommon ! >

LOG_PREFIX_VERSION=1

CONFIG_FILE=bootflash:switch.cfg

?=0

BOOT=bootdisk:,1;

SLOTCACHE=cards 1=104([email protected],[email protected]),2=104([email protected],[email protected]),3=104([email protected],[email protected]),4

=104([email protected],-);

CRASHINFO=bootflash:crashinfo_20090227-190703

TYFIB_BLOCK_ALLOC=

BSI=0

ACL_DENY=0

PF_REDUN_CRASH_COUNT=0


How can I fix it? can yo give a example please?


Thnks

Regards

Yudong Wu Tue, 03/24/2009 - 13:33
User Badges:
  • Gold, 750 points or more

It looks like you have an extra BOOT variable " ,1".

BOOT variable = ,1;sup-bootdisk:s72033-advipservicesk9_wan-mz.122-18.SXF15a.bin,


try to remove all boot statement in your current config and then add the one you need back. After that, check the output of "show bootvar".

a.alekseev Tue, 03/24/2009 - 23:59
User Badges:
  • Gold, 750 points or more

in rommon do the following


BOOT=sup-bootdisk:s72033-advipservicesk9_wan-mz.122-18.SXF15a.bin

sync


and check "boot system" in the configuration


Actions

This Discussion